Unified code and workflow + logic.

All that s needed now is Wifi integration with the outputs.

DSM is weird... will look again later.

1 files changed, 0 insertions, 74 deletions

diff --git a/learning_examples/DHT_Tester_esp32/DHTtester_esp32.ino b/learning_examples/DHT_Tester_esp32/DHTtester_esp32.ino
deleted file mode 100644
index f12bfb5..0000000
--- a/learning_examples/DHT_Tester_esp32/DHTtester_esp32.ino
+++ /dev/null
@@ -1,74 +0,0 @@
-// Example testing sketch for various DHT humidity/temperature sensors
-// Written by ladyada, public domain
-
-// REQUIRES the following Arduino libraries:
-// - DHT Sensor Library: https://github.com/adafruit/DHT-sensor-library
-// - Adafruit Unified Sensor Lib: https://github.com/adafruit/Adafruit_Sensor
-
-#include "DHT.h"
-
-#define DHTPIN 4     // Digital pin connected to the DHT sensor
-// Feather HUZZAH ESP8266 note: use pins 3, 4, 5, 12, 13 or 14 --
-// Pin 15 can work but DHT must be disconnected during program upload.
-
-// Uncomment whatever type you're using!
-//#define DHTTYPE DHT11   // DHT 11
-#define DHTTYPE DHT11   // DHT 22  (AM2302), AM2321
-//#define DHTTYPE DHT21   // DHT 21 (AM2301)
-
-// Connect pin 1 (on the left) of the sensor to +5V
-// NOTE: If using a board with 3.3V logic like an Arduino Due connect pin 1
-// to 3.3V instead of 5V!
-// Connect pin 2 of the sensor to whatever your DHTPIN is
-// Connect pin 3 (on the right) of the sensor to GROUND (if your sensor has 3 pins)
-// Connect pin 4 (on the right) of the sensor to GROUND and leave the pin 3 EMPTY (if your sensor has 4 pins)
-// Connect a 10K resistor from pin 2 (data) to pin 1 (power) of the sensor
-
-// Initialize DHT sensor.
-// Note that older versions of this library took an optional third parameter to
-// tweak the timings for faster processors.  This parameter is no longer needed
-// as the current DHT reading algorithm adjusts itself to work on faster procs.
-DHT dht(DHTPIN, DHTTYPE);
-
-void setup() {
-  Serial.begin(9600);
-  Serial.println(F("DHTxx test!"));
-
-  dht.begin();
-}
-
-void loop() {
-  // Wait a few seconds between measurements.
-  delay(2000);
-
-  // Reading temperature or humidity takes about 250 milliseconds!
-  // Sensor readings may also be up to 2 seconds 'old' (its a very slow sensor)
-  float h = dht.readHumidity();
-  // Read temperature as Celsius (the default)
-  float t = dht.readTemperature();
-  // Read temperature as Fahrenheit (isFahrenheit = true)
-  float f = dht.readTemperature(true);
-
-  // Check if any reads failed and exit early (to try again).
-  if (isnan(h) || isnan(t) || isnan(f)) {
-    Serial.println(F("Failed to read from DHT sensor!"));
-    return;
-  }
-
-  // Compute heat index in Fahrenheit (the default)
-  float hif = dht.computeHeatIndex(f, h);
-  // Compute heat index in Celsius (isFahreheit = false)
-  float hic = dht.computeHeatIndex(t, h, false);
-
-  Serial.print(F("Humidity: "));
-  Serial.print(h);
-  Serial.print(F("%  Temperature: "));
-  Serial.print(t);
-  Serial.print(F("°C "));
-  Serial.print(f);
-  Serial.print(F("°F  Heat index: "));
-  Serial.print(hic);
-  Serial.print(F("°C "));
-  Serial.print(hif);
-  Serial.println(F("°F"));
-}